4
TP-CU3-ZD and TP-CU3 Content
This guide provides the initial steps to set up and configure the following Tap models:
• TP-CU3-ZD
10/100/1000 Tap with Zero Delay
• TP-CU3-ZD-DC 10/100/1000 Tap with Zero Delay, -48V DC power
• TP-CU3
10/100/1000 Tap
• TP-CU3-DC
10/100/1000 Tap, -48V DC power
Carefully unpack the Tap and check for damaged or missing parts.
• 2 Power cords and power supplies, 12VDC, 3.3A, 2.5mm, IEC-C13
• 2 Power cords and power supplies, 12VDC, 1.5A, 2.5mm, IEC-C13 (TP-
CU3 only)
• Retainer clip (not included with -DC models)
• 3 CAT 5e 4-pair (purple) cable, 3-meter, RJ45
• 1 CAT 5e 4-pair (green) Crossover cable, 3-meter, RJ45
• Registration card
You may have also ordered a panel for rack mounting and an extended warranty. Check
the packing slip against parts received. If any component is missing or damaged,
contact our Order Management department via email at Order-Management@
ixiacom.com or if this is a Demo unit, contact [email protected].