14
Step 4
Connect to the Network
To connect the Tap to the Network:
1. Connect Network Port A to the appropriate switch, server or router using one of
the supplied purple CAT5e cables.
2. Connect Network Port B to the appropriate switch, server or router using one of
the supplied purple CAT5e cables.
3. Verify that the Tap Network Ports are cabled in-line between two devices
4. Verify the link LEDs illuminate.
Figure 11 - Connecting to the Network
®
www.netoptics.com
Monitor
Network
10
100
1000
LINK
ACT
1
2
Full Duplex Tap
Full Duplex Tap
A
A
B
B
To
switch, server or router
To switch, server or router
