IWILL VD133 Pro Series, Руководство пользователя

Страница: 67 / 80

67
VD133 Pro Series
Chapter 5 BIOS Setup
5.7.9.4 PCI master
When On, the system can be resumed from power saving mode by any PCI
/ master activity signal.
Options OFF (*)
ON
5.7.9.5 Wake up by PCI card
When enabled, you can “wake-up” your system using a PCI rev.2.2 card,
such as a WOL card, connected in your PCI slot.
Options Enabled
Disabled (*)
5.7.9.6 Wake Up by Ring/LAN
When enabled, the PC can power-on through an external modem connected
to your PC. For example, you may send an e-mail message to your PC from
another location, and this will power-on your PC. When using this feature,
you must have a modem, and your PC must be turned off.
Note: This feature alone doesn’t allow you to power off your PC (see 4.6.
9 Suspend Mode).
Options Enabled
Disabled (*)
5.7.9.7 PWROn/Resume by Alarm
When enabled, you can set the date and time to automatically power-on
your PC (similar to an alarm clock). The alarm from RTC (real-time clock)
automatically turns on the system.
Options Description
Disabled (*) Disables RTC alarm function
Enabled Sets Date (0-31) and Timer (hr, min, sec) to power-on the
PC. When date is set to 0, the Timer is set for every day.
5.7.9.8 IRQs Activity Monitoring
When On, any event that occurs will awaken the system after it has powered-
down.The following is a list of IRQ’s, or “Interrupt Requests,” which can
be exempted much as the COM ports and LPT ports above can. When an
I/O device wants to gain the attention of the operating system, it signals
this by causing an IRQ to occur. When the operating system is ready to
respond to the request, it interrupts itself and performs the service.