IWILL P4DA, Руководство пользователя, Страница: 52 / 96

P4DA Motherboard
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual 4•12
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Mounting Holes
There are 6 mounting
holes on the motherboard
that should correspond to
mounting standoffs on the
system housing’s mother-
board mounting plate.
Mounting
holes
4. Insert the board in the housing and align the mount-
ing holes to the standoffs on the housing’s
motherboard mounting plate. Make sure all of the
rear I/O ports are properly aligned with the open-
ings in the I/O panel shield.
5. Attach the board to the housing by inserting mount-
ing screws in all the holes and tightening them
snugly.
Connecting Front Panel Components
After the motherboard is installed in the system housing,
you should connect whatever front panel components
the housing has to the Front Panel feature connector on
the motherboard.
The figure below indicates the pin assignments of the
connector for your reference.
AL
i
mPGA 478B
+
JP2
CPU
ATX PWR
F
ron
t P
ane
l
BIOS
J14
J17
J21
J26
J25
J24
J23 J20
CN3_AUX In
CN4_CD In
J16 J18 J19
J15
ALADDiN-P4
J13
J6
J7
J8
J9
J11