IWILL KK400 Series, Руководство пользователя

Страница: 64 / 110

KK400 Series Motherboar KK400 Series Motherboar
KK400 Series Motherboar KK400 Series Motherboar
KK400 Series Motherboard d
d d
d
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 5•2 5•2 5•2 5•2 5•2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installing an AGP Card
The AGP connector on the board supports AGP 4X and
8X 1.5-volt display cards. Follow the instructions that come
with the display card for installing the card hardware in
the AGP slot.
AGP Configuration
You can configure the amount of system memory the AGP
card will use as auxiliary memory by adjusting the AGP
Aperture Size setting in the Advanced Chipset Features
section of the CMOS Setup Utility. The default aperture
setting is 64MB the maximum is 256MB.
Display Drivers
You should install the display card’s display driver soft-
ware according to the instructions that come with the
card after you have completed system assembly and have
installed an OS and the support software for this
motherboard.
A A
A A
AGP Apertur GP Apertur
GP Apertur GP Apertur
GP Aperture Setting e Setting
e Setting e Setting
e Setting
You can set the AGP ap-
erture size in the Ad-
vanced Chipset Features
section of the CMOS
Setup Utility