IWILL KK400 Series, Руководство пользователя

Страница: 32 / 110

KK400 Series Motherboar KK400 Series Motherboar
KK400 Series Motherboar KK400 Series Motherboar
KK400 Series Motherboard d
d d
d
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 2•18 2•18 2•18 2•18 2•18
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
WOM: Wake On Modem Connector J27
Function: A connector for the lead from an internal mo-
dem that supports the Wake On Modem feature.
Description: This feature enables the system to “wake
up” from Suspend mode when it receives a signal over a
modem it is connected to. It works with an internal PCI
modem card that supports this feature by connecting the
card to the WOM connector on the motherboard.
The motherboard supports WOM through a PCI bus sig-
nal. This signal will wake up the computer only when it
is plugged into an AC power source and the system is in a
supported suspend state.
More Information: Please see the Power Management
Setup section of “Configuring the CMOS Setup Utility” in
Chapter 5 for information.
JP2 Connector: JP2 Connector:
JP2 Connector: JP2 Connector:
JP2 Connector:
The cable from the audio
features on the FI Panel
plugs into this connec-
tor.
JP2 connector
W W W W Wak ak ak ak ake On Modem: e On Modem: e On Modem: e On Modem: e On Modem:
This connector is for a
PCI modem card that
supports WOM.
J27 Wake On Modem connector
FI Panel Audio Connector JP2
Function: Connector for the audio features on the Smart
Panel.
Description: The audio cable from the FI Panel plugs into
to this connector.
More Information: See the “Connecting Internal Periph-
erals” and “Configuring the CMOS Setup Utility” sections
in Chapter 5.
J27
JP2