IWILL H4204 Series, Руководство по установке оборудования

Страница: 41 / 64

41
3. When the BIOS update process is complete, the utility returns to the DOS prompt.
The AMI BIOS is immediately activated when you power on the computer every time. The BIOS reads
the system information contained in the CMOS and begins the process of checking out the system and
configuring it. After finishing configuring the whole system, then BIOS will continue to seek an operating
system on one of the disks, launch then turn control over to the operating system.
While the AMI BIOS is in control, the Setup program can be activated in the way:
By pressing the <DEL> key when the following message appears briefly at the bottom of the screen
during the POST (Power On Self-Test).
Press <DEL> to enter SETUP