IWILL H4204 Series, Руководство по установке оборудования

Страница: 40 / 64

40
5-2 Updating BIOS Setup
Creating a bootable floppy disk
A
、
DOS environment
Insert a 1.44 MB floppy disk into the drive.
At the DOS prompt, type:
format A:/S then press <Enter>.
B
、
Microsoft
®
Windows
®
environment
Insert a 1.44 MB floppy disk into the floppy disk drive.
From your Windows desktop, click on Start, then select My Computer.
Select the 3 1/2 Floppy Drive icon.
Click File from the menu, and then select Format. A Format 3 1/2 Floppy Disk window appears.
If you are using Windows™, select “Create an MS-DOS startup disk” from the format options field,
then click Start.
Move the latest BIOS file to the bootable floppy disk.
Using “AMIFLASH.EXE” to update the BIOS
Update the BIOS using the AMIFLASH.EXE utility in DOS environment.
1. Visit the IWILL website ( http://www.iwill.net ) to download the latest BIOS file for your
motherboard. Save the BIOS file to a bootable floppy disk.
2. At the DOS prompt, type the command line:
AMIFLASH / <filename>
where “filename” means the latest (or original) BIOS file that you copied to the bootable floppy
disk. The screen displays the status of the update process.
Important
The BIOS information on the screen is for reference only. What you see on your screen may not be
exactly the same as shown.
Warning
DO NOT shutdown or reset the system while updating the BIOS! Doing so may cause system boot
failure! Make sure to set protection BIT disable before flash BIOS.