IWILL DS133R, Руководство пользователя, Страница: 71 / 80

Chapter 5 BIOS Setup
71
DS133R Series
5.8.2 Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system reconfiguration has caused such a serious conflict that the operating
system can not boot.
Options Enabled
Disabled (*)
5.8.3 Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the
boot and Plug and Play compatible devices. However, this capability means abso-
lutely nothing unless you are using a Plug and Play operating system such as
WindowsÒ98/95/NT. If you set this field to “manual” choose specific resources by
going into each of the sub menu that follows this field (a sub menu is preceded by a
“Ø”).
Options Description
Auto (ESCD)(*) Resources controlled by BIOS automatically
Manual Resources controlled by the user
5.8.3.1 IRQ Resources
When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt.
5.8.3.1.1 IRQ3/4/5/7/9/10/11/12/14/15 assigned to
This item allows you to determine the IRQ assigned to the
ISA bus and is not available to any PCI slot. Legacy ISA for
devices compliant with the original PC AT bus specification,
PCI/ISA PnP for devices compliant with the Plug and Play
standard whether designed for PCI or ISA bus architecture.
Options PCI / ISA PnP (*)
Legacy ISA
5.8.3.2 DMA Resources
This sub menu can let you control the memory resource.
5.8.3.2.1 Reserved Memory Base
Reserved a low memory for the legacy device (non-PnP
device).
Options C800 / CC00 / D000 / D800 / DC00 / D400
/ N/A (*)
5.8.3.2.2 Reserved Memory Length
Reserved a low memory length for the legacy device
(non-PnP device).
Options 8K (*) / 16K / 32K / 64K.