IWILL DS133R, Руководство пользователя, Страница: 51 / 80

Chapter 5 BIOS Setup
51
DS133R Series
Chapter 5
BIOS Setup
5.1 Introduction
The motherboard uses AWARD BIOS, which is stored in flash memory and can be
upgraded using the appropriate software program. The setup program is for viewing and
changing the BIOS setting for a computer. These settings are stored in battery-backed
RAM so that it retains all the settings after the power has been turned off.
5.1.1 Upgrade BIOS
The BIOS can be upgraded from a diskette with the Award Flash utility —
AWDFLASH.EXE. The BIOS image file, and update utility are available from
IWILL’s WEB site: www.iwill.net
5.1.2 Enter BIOS setup program
Power-on the system by either pressing the Power-On button, or by using any
of the power-on features provided by the motherboard. Then, press the <Del>
key after the Power-On Self Test (POST), and before the scanning of IDE
devices. Simply look for the message “Press DEL to enter SETUP” displayed
at the bottom of the screen during the boot up process. If the message disap-
pears before you’ve had a chance to respond, you can restart the system by
Turning off the system power then turn it on again, or
Pressing the “RESET” button on the system case, or
Pressing <Ctrl>, <Alt> and <Del> keys simultaneously.
5.1.3 Using BIOS setup program
The following table shows the function keys available for each menu screen.
á
Up Move to the previous field
â
Down Move to the next field
ß
Left Move to the field on the left hand side
à
Right Move to the field on the right hand side
<Esc>
Quit from setup program without saving changes, or
Exit from current menu page and return to main menu page
<PgUp> or <+> Select the previous value for a field
<PgDn> or <-> Select the next value for a field
<F1> General Help
<F2> Item Help
<F5> Previous Values
<F6> Fail-Safe Defaults
<F7> Optimized Defaults
<F10> Save the current value and exit setup program