IWILL DS133R, Руководство пользователя, Страница: 64 / 80

Chapter 5 BIOS Setup
64
DS133R Series
5.6.9.1 KB Power-On Password
In you wish to use this function, bring the cursor to the field written “Enter”,
and then press <Enter>. The computer will display the message, “Enter
Password”. Type your password and press <Enter>. After the message
“Confirm Password” is displayed, re-type your password. The KB Power-
On function will be in effect after you save and exit setup.
To disable a password, bring the cursor to the “Enter” field again, then
press <Enter>. The computer will display the message, “Enter Password”.
Press <Enter>. A message will confirm that the password is disabled.
Once the password is disabled, the system will boot and you can enter
setup program freely.
5.6.9.2 Hot Key Power-On
This field specifies key selection for the Keyboard-Power-On hot key.
Options Ctrl-F1 / Ctrl-F2 / Ctrl-F3 / Ctrl-F4 / Ctrl-F5 / Ctrl-F6
Ctrl-F7 / Ctrl-F8 / Ctrl-F9 / Ctrl-F10 / Ctrl-F11 / Ctrl-F12
5.6.9.3 PS2 MOUSE Button Power ON
This field specifies key selection for the PS2 MOUSE Button -Power-
On hot key.
Options Left / Right
5.6.10 Onboard FDC Controller
This field enables or disables the onboard floppy controller. Select enabled if
you intend to use your floppy disk drive.
Options Enabled (*)
Disabled
5.6.11 Onboard Serial Port 1 / 2
These fields configure the onboard serial ports. There are several port addresses and
IRQ channels to select from.
Options Description
3F8 / IRQ 4(*) Port address 3F8h, IRQ 4
2F8 / IRQ 3(*) Port address 2F8h, IRQ 3
3E8 / IRQ 4 Port address 3E8h, IRQ 4
2E8 / IRQ 3 Port address 2E8h, IRQ 3
Auto BIOS assigns port address and IRQ channel automati-
cally
Disabled Disables serial port