IWILL DP533 Series, Руководство пользователя

Страница: 68 / 114

DP533 Series Motherboar DP533 Series Motherboar
DP533 Series Motherboar DP533 Series Motherboar
DP533 Series Motherboard d
d d
d
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 4•18 4•18 4•18 4•18 4•18
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Connecting Front Panel Components
After the motherboard is installed in the system housing,
you should connect whatever front panel components the
housing has to the Front Panel feature connector on the
motherboard.
The figure below indicates the pin assignments of the
connector for your reference.
EEB 3.0 Housing Installation
If you install the motherboard in an EEB 3.0 system hous-
ing, you should not attach the CPU Backplates. Instead,
attach the board to the housing’s motherboard mounting
plate first. When you do this, the Retention Mechanism
mounting holes should line up with the Retention Mecha-
nism mounting standoffs on the housing’s motherboard
mounting plate. You can then position and install the
Retention Mechanisms by screwing them into the mount-
ing standoffs.
Once you have installed the Retention Mechanisms, you
can proceed to install the Heatsink and Processor Wind
Tunnel assembly as described earlier in this chapter. Please
note that the PWT assembly should be oriented so that
the fan blows towards the rear of the system housing.
Front Panel feature connector
Fr Fr
Fr Fr
Front P ont P
ont P ont P
ont Panel Connector: anel Connector:
anel Connector: anel Connector:
anel Connector:
Leads from the front
panel features connect
to this header.
System LED
Keyboard Lock
Power On
Speaker
IDE LED ACPI Reset
KL
IDE/SCSI LED
Power LED