IWILL DP533 Series, Руководство пользователя

Страница: 59 / 114

4: Installing The Motherboar 4: Installing The Motherboar
4: Installing The Motherboar 4: Installing The Motherboar
4: Installing The Motherboard d
d d
d
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 4•9 4•9 4•9 4•9 4•9
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2. Place a heatsink retaining clip on one of the Reten-
tion Mechanisms so that the large outer center tab is
on the outside and fits over the extension on the
Retention Mechanism. The inner center tab should
clip over the edge of the Heatsink.
3. Hold the clip down against the mechanism and press
down on one end of the retaining clip so that the tab
on the end clips securely over the extension on that
end of the mechanism.
4. Press the other end of the retaining clip down so
that it clips securely over the extension at the other
end of the mechanism. The spring tension of the
clip should now hold that side of the heatsink se-
curely against the Retention Mechanism.
5. Repeat the procedure above on the Retention Mecha-
nism on the other side of the Heatsink.
After you install the two retaining clips, the Heatsink
should be securely attached.
position the clip so that the
large tab is on the outside
and fits over the mechanism
extension there
P P
P P
Position Heatsink Clips osition Heatsink Clips
osition Heatsink Clips osition Heatsink Clips
osition Heatsink Clips
Position a clip on each
Retention Mechanism.
A A
A A
Attach Heatsink Clips ttach Heatsink Clips
ttach Heatsink Clips ttach Heatsink Clips
ttach Heatsink Clips
Press the clip ends onto
Retention Mechanism.
Hold the clip down in the
middle while you press the
each end of the clip onto
the Retention Mechanism