IWILL DP533 Series, Руководство пользователя

Страница: 52 / 114

DP533 Series Motherboar DP533 Series Motherboar
DP533 Series Motherboar DP533 Series Motherboar
DP533 Series Motherboard d
d d
d
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 4•2 4•2 4•2 4•2 4•2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installing CPUs
This motherboard uses the Intel Xeon processor. Both
single and dual CPU configurations are supported on this
motherboard.
To install an Intel Xeon CPU on the motherboard it is very
important to precisely an entirely follow the procedure
for installing both the CPU and its cooling assembly. Fail-
ure to do so can result in either improper operation or
damage to the CPU and possibly the motherboard.
To install an Intel Xeon processor on this motherboard
you will need to do the following:
• Install the Xeon processor in an mPGA604 socket
• Install the Heatsink Retention Mechanisms
• Install a Xeon-specific Heatsink
• Install the Processor Wind Tunnel assembly
Please follow the procedure detailed below to install one
or two Xeon processors on the board. Intel boxed Xeon
processors come with full installation instructions. If you
have these, please also read and follow those instructions
carefully.
Processor Selection
This motherboard supports all Xeon processors and the
BIOS automatically detects the required settings and con-
figures the CMOS Setup Utility accordingly. If you install
two Xeon processors, they must have identical specifica-
tions.
Requir Requir
Requir Requir
Required T ed T
ed T ed T
ed Tools: ools:
ools: ools:
ools:
• Philips-head screw
driver (Crosshead)
• Flathead screw driver