iWeld GORILLA POCKETMIG 225 SYNERGIC Скачать руководство пользователя страница 58

Страница: 58 / 68

Wire check function: press the Right Button (4) again to enter to the wire check mode, rotate

Right knob (3) to select ON/OFF

Feeding the wire

- Remove the conical nozzle (24) and the welding tip (25) from the torch. The conical nozzle is

removed by turning clockwise and pulling off simultaneously. The welding tip threads out of the

tip adapter.

- With the wire feed cover door still open pull the torch trigger (20) and check that the wire is

feeding smoothly through the feed roller and into the torch

- Now stretch the torch lead and handle out as straight as possible from the machine and select

the wire check function. This will start the feed motor running at full speed to feed the wire

through the torch liner.

- Once the wire comes out past the end of the torch neck, pull the torch trigger or press any but

ton on the display to stop the automatic wire feed.

- Close the wire feed cover door

- Replace the welding tip (25) and conical nozzle (24) back onto the torch neck and trim off any

excess wire

You are now ready to weld!

MMA/STICK mode operation

Note - MMA/Stick Welding requires an MMA lead set .

- Connect Earth Lead Quick Connector (23) to the negative (-) output welding terminal (7).

- be strong contact with clean, bare metal, with no corrosion, paint or scale at the contact point

- Connect the ARC/electrode holder lead (optional) to the positive (+) welding output terminal

Note – some welding electrode types utilize different connection polarity. If in doubt, contact

the electrode manufacturer

- Turn the machine on at the Mains Power Switch (10).

- Press the Left button (2) to mode section, and select the mode by Left knob (1), and press the

Left knob (1) to confirm the MMA selection.

Содержание GORILLA POCKETMIG 225 SYNERGIC





































































Результаты поиска

Содержание GORILLA POCKETMIG 225 SYNERGIC

Отзывы:

Бренды по названию

Популярные бренды

iWeld GORILLA POCKETMIG 225 SYNERGIC, Руководство пользователя

Результаты поиска

Содержание GORILLA POCKETMIG 225 SYNERGIC

Отзывы:

Бренды по названию

Популярные бренды