iWeld 800MIG280CSP, Руководство пользователя

Страница: 42 / 48

EN
3-3. Commissioning and operation
Adjust the welding method to the required one (gas-shielded welding, pulse gas-shielded weld-
ing) and then adjust other parameters.
Adjustable parameters of gas-shielded welding and pulse gas-shielded welding:
● Current, electrode feeding speed and plate thickness: These three parameters are interlocked,
that is, adjustment of one of them will lead to the corresponding adjustment of the other two.
In fact, since this welder has a built-in highly intelligent expert system, if any of these three
parameters changes, most of the detailed corresponding data will be called out automatically
from the database, thus greatly reducing the operation complexity of operator. The user only
needs to set the welding method, operation mode, material type, electrode wire diameter
and current(or electrode feeding speed or plate thickness), then the welder will automatically
find out the best parameter set from the expert database. The welder owns the most compre-
hensive, the most authoritative and the most intelligent expert database at present.
● Arc length: the expert database already provides a standard arch length (=0) and the user
can increase or decrease the value based on the actual needs of the process.
● Inductance: The expert database provides a standard inductance of 0 and the user can
increase or decrease the value based on the actual needs of the process. Different welding
methods correspond to different inductance functions.
● Material type “Q,R”: The user may select corresponding material type in the material selection
menu based on the material of the base metal and the electrode wire.
● Electrode wire diameter “P”: Ø0.8, Ø1.0, Ø1.2.
● Operation Mode “S”: The welder has 5 torch operation modes as shown in the figure below:
4T operating mode
2T operating mode
GPR GPO t
+
I
I
t
GPO GPR
+ +
I
I
M anual
Knob for adjusting
the current
Knob for adjusting
the voltage
10