16
5.2 CHARGING
iriComm 3.0 wireless (and some wired PLUS versions) has an advanced battery and charge circuit. The 1000
mAh LiPo/LiIon battery provides long life and long operational time.
When the headset is turned ON, a Voice Prompt will inform of the present battery status with a
“
Battery
High
” (80
-
100%), “
Battery Medium
” (20
-
80%)
or
“
Battery Low
” (10
-
20%).
At the 10% battery level there is
an automatic Cut Off, which will turn off the headset.
When the Low Battery level is reached, the Status LED on the rear of right
-
side earcup, will flash RED every
5 seconds.
To charge the headset place the magnetic connector in the bottom of the right earcup. As soon as the
charge plug is connected, the battery is being charged. The Status LED will flash RED every 2 seconds, as
long as the battery is being charged. When the battery is fully charged the Status LED will stop flashing and
turn off.
It doesn
’
t matter if the headset is ON or OFF during charging.
