Rev 1.0
Page 39 of 69
Generic Q7 Carrier Card Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
5
VPP
SIM Power Supply
6
IO
SIM IO Data
Figure 31: SIM Slot Pin Out
2.15
Display LVDS Interface
Qseven support two LVDS interface from MXM connector with some control interfaces. The Q7
Generic Carrier Card supports both LVDS interfaces with two independent LVDS connectors
with backlight interfaces of 15V 300mA output. LVDS0 connector is physically located on top of
board & Backlight connector on bottom of the board. LVDS1 & backlight connector physically
located on bottom of board.
Note: If any RGB LCD is interfaced to Q7 carrier card, LVDS Channel0 can’t be used.
Figure 32: LVDS0 Connectors
Pin No Pin Detail
Description
1
TFT1_VCC_3V3
Supply voltage for TFT
2
TFT1_VCC_3V3
Supply voltage for TFT
3
GND
Ground
4
GND
Ground
5
LVDS_A0-
LVDS
primary
channel
differential pair 0.
6
7
GND
Ground
8
LVDS_A1-
LVDS
primary
channel
differential pair 1.
9
