Rev 1.0
Page 25 of 69
Generic Q7 Carrier Card Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
11
LINK 100#
LED1 Cathode
12
VCC_3V3
LED1 Anode
13
ETH_LINK#
LED1 Cathode
14
VCC_3V3
LED1 Anode
S5,S6,S7,S8 Shield Ground
Shield Ground Ethernet
15
ETH_ACT#
LED1 Cathode
A1
USB_VBUS0
USB0 5V Power (Bottom)
A2
USB_P0-
USB0 Data negative (Bottom)
A3
USB0 Data Positive(Bottom)
A4
Ground
USB0 Ground (Bottom)
S1,S2
Shield Ground
Shield Ground (Bottom)
B1
USB_VBUS2
USB2 5V Power (Top)
B2
USB_P2-
USB2 Data negative (Top)
B3
USB2 Data Positive (Top)
B4
Ground
USB2 Ground (Top)
S3,S4
Shield Ground
Shield Ground USB2 (Top)
Figure 11: RJ45 Magjack with Dual USB Type-A Connector Pin Out
2.6
USB Host4
USB Host4 signals from the MXM connector is connected to standard USB Type-A connector.
USB Host4 connector is physically located on top of the board.