Rev 1.0
Page 26 of 69
Generic Q7 Carrier Card Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Figure 12: USB Host4 Connectors
Pin No
Pin Details
Description
1
USB_VBUS4
USB4 5V Power
2
USB_P4-
USB4 Data negative
3
USB4 Data Positive
4
Ground
USB4 Ground
S1,S2,S3,S4 Shield Ground
Shield Ground
Figure 13: USB Host4 Connector Pin Out
2.7
USB OTG
USB port1 OTG signals from MXM connector is connected to USB micro (Optional mini-AB)
connector. USB port1 supports OTG full functionality. To support USB OTG full functionality
jumper (J22) option is provided for USB-ID pin, either proper Host and Device cable can be used
or Jumper can be used to configure the port. USB1 OTG connector is physically located on top
of the board.