Step 9 - Power-ON The SBC
Connect the 12V power supply plug to the power connector
(J18) of the SBC as shown below and switch ON the power
supply.
Warning :
1. Contact iWave if power status LED is not glowing or PS Error status LEDs
are glowing.
Once power is applied to the SBC, the power LED in SBC will
glow as shown in the below image.
PS Error Status LED :
Indicates a secure lockdown state.
Power LED
:
Power to the board is stable
PS Error OUT LED :
Asserted for accidental loss of power, a
hardware error, or an exception in the MPSoC PMU.
Quick Start GuideiW
-RainboW
-G28D
iW
-RaniboW
-G28D
iW
-RainboW
-G28D
iW
-RainboW
-G28D
iW-RainboW-G36S
12
