Warning:
1. Do not try to connect any other power supply other than the supplied one
along with the Development Kit.
2. Do not plug or remove the SOM from carrier board with live power.
3. Contact iWave If power LEDs are not glowing.
Once Power is applied to iW-RainboW-G34D i.MX 8M Mini or
iW-RainboW-G37D i.MX 8M Nano SODIMM Development
Platform, the Red Power LEDs in the i.MX 8M Mini or i.MX 8M
Nano SODIMM SOM and carrier board will glow as shown in the
Connect the 5V power supply plug to the power connector (J2)
of the iW-RainboW-G34D/G37D platform as shown below and
switch ON the power supply.
09
iW-RainboW-G28D
09
Quick Start Guide
Quick Start Guide
Power-ON the Development Platform
