Quick Start Guide
iW-RainboW-G25D
Install the driver for Debug Port in Host PC/Laptop using the
below link.
http://www.ftdichip.com/Products/ICs/FT232R.html
Connect Type-A end of USB cable to PC and Micro AB end of
USB cable to Development platform's debug Micro USB
connector(J8) as shown below.
08
Step 6- Setting-Up
Debug Port Setting
Setup the Debug Terminal parameters.
Baud Rate :
115200
Data bits :
8
Parity :
None
Stop Bits :
1
Flow Control :
None
iW-RainboW-G28D
iW-RainboW-G34D
08
