Iwatsu SS-560, Инструкция по эксплуатации, Страница: 10 / 36

6
Read this page to ensure proper safety. (to be continued)
WARNING
•
Do not place any object close to the ventilation port of this
instrument.
If any object close to the ventilation port of this instrument, the air
ventilation is blocked and the internal temperature increases,
causing a fire or malfunction.
•
The BNC ground of this instrument is connected to an
electric ground through the power supply such as PS-52 or
PS-54 to prevent danger. Use the equipment only for the
floating measurement when executing the floating
measurement.
When the ground terminal of the instrument is connected to a
ground besides the earth potential, this instrument, the equipment
and the circuit to be measured must be damaged because the
equipment that connects this instrument is connected to a ground.
Moreover, there must be danger of getting an electric shock.
•
Insert the power plug in the outlet after confirming dust etc.
do not adhere. The power supply plug are pulled out from
the outlet, and moreover, please check and clean it once a
year from half a year.
The dirt causes electric shock, a fire or damage.
•
This instrument SS-560 and SS-570 might not be able to be
used at the same time because there are restrictions on
power consumption in the probe power on the oscilloscope
side according to the measured current.
Refer to page25 and page30 for details.
Wrong example
Oscilloscope etc.
Power supply
This instrument
Current probe