Iwatsu ENTERPRISE 5.0, Руководство пользователя

Страница: 275 / 338

ATTENDANT CONSOLE USER GUIDE - 257
To turn Message Waiting On:
)
Dial the desired extension number
)
Press the F1 REG button to leave a message
)
Press the button Release button
END
To cancel Message Waiting:
)
Press the
F2 CLR1
button to clear the first message left
)
Press the F3 CLR2 button to clear the second message left
)
Press the F4 CLR3 button to clear the third message left
)
Press the
F5 CLR4
button to clear the fourth message left
)
Press the
F6 ALCLR
button to clear all the messages left
)
Press the Release button END
NIGHT MODE
Allows you to change the ringing termination point for outside lines. This
alternate point might be a loud bell, a phone or a group of phones. A
programming option may be enabled to allow the ECS to automatically
switch to the Night Mode at a certain time; however, you must manually
switch the system back to the normal mode.
Operation
To place the system in Night Mode operation:
)
Press the Night Mode button NIGHT and the lamp for that
button will be solid red
)
Press the Release button RLS
To place the system in Day Mode operation:
)
Press the Night Mode button NIGHT and the lamp for that
button will be off
)
Press the Release button RLS
OPERATOR PRIORITY
The system operator has the ability to override any ringing or voice announce
intercom call or paging call. This occurs when calls are made simultaneously,
or another party other than the operator makes the call first.