Iwatsu CS-5000 Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 234

Iwatsu CS-5000 Series Скачать руководство пользователя страница 6

iv

Read this page to ensure proper safety.

(Also read the following pages.)

WARNING

(Continued)

●

Do not put any foreign objects, such as metallic or

flammable objects through the ventilation opening.

If any foreign object of metal and the combustible one, etc. is put through the ventilation opening,

this may result in electric shock, fire, and/or malfunction.

If any foreign object enters this instrument, after making the power switch a standby, and pulling out

the power plug from the power outlet, contact Iwatsu office or our sales distributors for repair.

●

Always use a 3-prong power cord that suits power supply

voltage for this instrument.

Using a power cord that is incompatible with the power voltage may result in

electric shock, fire

and/or malfunction. Additionally, using a 2-prong power cord may result in electric shock.

Unless otherwise specified at purchase, a 100V (90 V to 132 V) power cord is supplied with the

instrument. If operating the instrument at 200V (180 V to 250 V), always use the 3-prong power

cord (optional) for 200V systems (rating: 250V) specified by Iwatsu.

- If the power is supplied from the 2 prong receptacle using the 3-prong/2-prong conversion adapter,

ground the GND terminal of the adapter.

- When using the attached 3-prong power cord to supply the power from the 3- prong receptacle,

grounding is made through the GND line of the power cord.

●

Use this

instrument at a specified supply voltage.

Using this instrument at a voltage other than specified may result in electric shock, fire or

malfunction. Usable power supply voltage range is written on the rear panel.

●

Do not remove the case, cover and panel.

Since there are parts with a high voltage in this instrument, touching the part may cause electric

shock. When performing inspection, calibration, or repair, contact Iwatsu office or our sales

distributors.

●

When handling power cord, observe items below:

If not, fire or electric shock may occur. If the power cord is damaged, contact Iwatsu office or our

sales distributors for repair.

- Do not attempt to fabricate the power cord.
- Do not pull the power cord.
- Do not forcibly bend the power cord.
- Do not heat the power cord.
- Do not twist the power cord.
- Avoid getting the power cord wet.
- Do not bind the power cord together.
- Do not place heavy objects on the top of the power cord.

●

Do not modify or repair this instrument.

Modifications or repairs made by users may result in an electric shock, a fire, or a malfunction. This

instrument cannot be repaired by users. Do not open it to attempt repairs. For repairs, contact

Iwatsu office or our sales distributors. Note that modified products will not be accepted for repairs.

«
...
4
5
6
7
8
...
»

Содержание CS-5000 Series











































































































































































































































Отзывы:

Нет отзывов