Iwatsu ADIX VS, Техническое руководство

Страница: 66 / 136

ADIX-VS Technical Manual Section 2 – ADIX-VS Hardware
56
Overview of LEDs and Switches
Hook LED
This LED is the primary hook switch status indicator. This LED does not provide indication when
IX-COMLINK is ringing.
Status Description
ON IX-COMLINK is busy, off-hook on a conversation.
OFF IX-COMLINK is idle or ringing.
Mode LED
This LED provides audio status indication. It only functions when the Hook LED is lit.
Status Description
OFF Digital Key Telephone is in use.
SOLID IX-CTC/H Handset/Cradle or Headset connected to HEADSET jack is in use.
SLOW FLASH Microphone connected to PC Sound Card is in use. (0.8 sec. On / 0.2 sec. Off)
FAST FLASH Modem is in use. (0.1 sec. On / 0.1 sec. Off)
Switch 1-8 (Not Used)
Switches 1-8 must remain in the OFF position (factory setting).
PC Interface
There are three possible interfaces between PC and IX-COMLINK:
■
The PC serial interface.
■
The audio interface.
■
The modem interface.
PC Serial Interface.
This is the primary connection between the IX-COMLINK and your computer.
The PC serial interface is used to send control data between the PC and the IX-COMLINK.
Audio Interface.
If a sound card is connected to the IX-COMLINK LINE IN jack, a device driver is
required to control audio through the sound card. This device driver is supplied by the sound card
and/or computer telephony application manufacturer. The computer telephony application software
must also support this capability. These drivers are not included with the IX-COMLINK Installation
Disk.
Modem Interface.
A device driver is required to control the PC modem. Iwatsu recommends using
Unimodem (/V) if the application uses TAPI for controlling the modem. Also for controlling the
modem, the application must use a driver which supports the modem. Unimodem (/V) is included
with Windows® 95 or available from Microsoft Corporation.