3
Features of this product
The double windshield unit is constructed to shield the flame from wind
The special double windshield construction allows the air necessary for combustion to pass
through while preventing wind from affecting the flame, so the stove can be used stably
even in windy environments.
(Use may not be possible depending on the weather and wind conditions)
Detachable canister with magnet
The canister is installed using the magnet
instead of a lever.
This makes it difficult to install an incorrect or
faulty canister.
Heat panel to accelerate the vaporization of gas
As the vaporization of gas progresses during combustion, the temperature drops, the
heating power weakens, and it becomes impossible to use all the gas in the canister.
To prevent this, a moderate amount of heat from the flame of the burner during combustion
is transferred to the canister to accelerate the vaporization of gas, which maintains the
heating power so that all the gas can be used up.
This makes the canister slightly warm, but this is not a problem.
Pressure sensor safety device
If the pressure (temperature) inside the canister
becomes abnormally high (about 104ºF/40ºC or
higher), the canister is detached automatically,
and the flame is extinguished.
Pressure controller
Canister cover
Heat shield plate
Heat panel
Windshield unit holder
Burner head
Grate
Electrode
(Spark causes
ignition)
ON/OFF knob
Drip pan
Magnet
(Holds canister)
Protrusion of container-
receiving guide
Double windshield unit
Inner windshield unit
Outer windshield unit
Names and uses of parts
Be sure to read this Instruction Manual before use.
Specifications
Product name
FORE WINDS Rugged Camp Stove
Output (gas
consumption)
11,000 BTU/hr (3.3 kW)
(at an air temperature of 68-77ºF/20-25°C)
Model number
FW-RS01
Ignition type
Piezoelectric
Continuous
combustion
Approx. 71 minutes
(Actual value when completely using a new canister at
maximum power. Air temperature of 68-77ºF/ 20-25°C.)
Safety features
Pressure sensor safety device
(Detachable canister model)
Canister installation safety device
Canister
Dedicated canister labeled as “Iwatani Butane Fuel” or
“FORE WINDS Butane Fuel”
Maximum external
dimensions (in use)
13.42"/341 mm (W) × 11.14"/283 mm (D) ×
5.08"/129 mm (H)
Pot available
to use
Diameter of bottom of pot should be less than 9.5”/24 cm.
(The outside of pot should not touch the canister cover)
Diameter of bottom of small pot should be more than
6”/16 cm.
Weight capacity up to 44 lbs/20 kg including food and
cooking vessel.
Unit weight
Approx. 5.3 lbs/2.4 kg (canister not included)
● When the pressure sensor safety device has been activated,
return the ON/OFF knob to the “OFF” position, and then remove the canister from
the main unit. Next, carefully read “Usage precautions” (from page 6 through 8) and remove the cause of the problem. Next, either reinstall the
canister after it is been cooled by water or install a new canister before using the product again.
Canister
Use the following
dedicated canister
with this product.
Item labeled as
“Iwatani Butane Fuel” or
“FORE WINDS Butane Fuel”
Canister cap
Canister
notch
