Iwata HP-AH, Руководство пользователя

Страница: 7 / 18

－ ７ －
■３．
How to operate
３-１ Connection
CAUTION
* Use clean compressed air which is filtered through air filter.
Dirty air can cause painting failure.
* When you use for the first time after unpacking, clean inside with cleaning liquid in order to remove
remaining anti-corrosive oil inside fluid passage. Remaining oil can cause painting failure such as fish
eye (dented finishing).
* Firmly fasten air hose and fluid cup to airbrush.
If not done, disconnected hose or falling cup can injure human body.
（
1
）
Use slender and exclusive air hose for airbrush such as
Ø
4 x 6mm tube, etc.
（
2
）
Use air pressure at around 0.10~0.29 MPa . Use air regulator to get stable air pressure.
Use air filter to remove moisture, oil and dust in air.
３-２ Spraying
* Filter color material with fine filter paper (cloth), or pigments may clog
nozzle.
* When spraying lacquer or varnish, add retarder to prevent whitening.
* Preset handle is to adjust fluid output while adjusting fluid needle.
Slightly screw the handle until it is fully closed, indicated by the touching
of the preset handle to the needle chucking nut. Never tighten preset
handle further. Further tightening can damage nozzle.
* Never adjust blanking screw which is not supposed to be adjusted.
* Never damage nozzle cap or nozzle.
If done, it adversely affects
atomization.
* Do not mix different color material (example: paint and dyestuff).
If done, the viscosity will increase and cause malfunction.
(1) Before spraying, loosen needle chucking nut and gradually push needle inwards till needle touches nozzle,
and then retighten needle chucking nut. Pour cleaning liquid into cup and clean fluid passage.
(2) First push main lever with forefinger or thumb downwards in order to release air, and pull it toward you.
Then, color material will come out. Be sure to push main lever forward (original position) and detach finger
to stop spraying. If you do not push main lever (without air release), and just pull it forward, a big amount
of color material may jet out.