17
hints and tips
problem
cause / solution
Power
System does not turn on
or does not respond to the
remote control.
• Make sure mains adapter is properly connected to
the mains socket and the unit properly and that it has
power.
• Check that the remote control has a battery. The battery
may need to be replaced.
No Sound
Adjust the volume, it may not be turned up.
Static Sound
Signal reception is too low. Adjust the aerial or move the
unit to a stronger signal location.
Sound is distorted
Volume is too high. Adjust the volume control.
Desired station not found
Weak signal. Use the manual tune function.
iPod/iPhone
The unit doesn’t play iPod/
iPhone files or doesn’t
function as expected.
• Make sure the iPod/iPhone is connected properly.
• Standby mode may be activated; press the
STANDBY/
SOURCE
button again.
• Make sure the iPod/iPhone is switched on.
• Vibrations may have caused the iPod/iPhone to come
loose from the docking station.
• Check iPod mode or AUX mode is selected.
• Reinsert iPod/iPhone.
Remote Control
No functions or short
range.
• Insert new batteries.
• Aim the remote control directly towards the remote
sensor.
If the unit is not working properly disconnect the power source and then reconnect it.
specifications
model
iPHWAV10
mains supply
Mains adapter Input 100-240V ~ 50/60 Hz 0.3A
Mains adapter Output DC 5V 2.0A
output power
2 x 2W
battery power
1.5V x 2 (AAA size) (for clock back-up only)
radio frequency range
FM87.5 – 108 MHz
Specifications and features are subject to change without notice.
iPHWAV10_IB_final110509.indd 17
09/05/2011 4:45 PM
