12
4. Alarm 1 can be enabled and disabled by pressing the
MEM –/
AL.1
button on the unit or the
AL ON/OFF
button on the
remote control repeatedly until the
1
indicator disappears.
5. To set ALARM 2, press and hold the
MEM +/AL.2
button on the
unit or on the remote control. The alarm indicator
2
and the
hour digits will flash. Repeat steps 1-3.
6. Alarm 2 can be enabled and disabled by pressing the
MEM +/
AL.2
button on the unit or the
AL ON/OFF
button on the
remote control repeatedly until the
2
indicator disappears.
7. To turn off the alarm, press the
STANDBY/SOURCE
button
when the alarm sounds. The
1
or
2
indicators will still show in
the display and the alarm function will still be active the next
day.
snooze function
1. Press the
SNOOZE/DIMMER
button when the alarm sounds. The corresponding
alarm indicators
1
or
2
will flash. The alarm will go off and will then sound again in
approximately 10 minutes. Press the
STANDBY/SOURCE
button on the unit or on
the remote control to turn off the snooze function.
setting the alarms
1. In standby mode, press and hold the
MEM –/AL.1
button on the
unit or on the remote control to set ALARM 1. The alarm indicator
1
and the hour digits will flash. Press the
SKIP
buttons
to adjust the hour digits, then press the
MEM –/AL.1
button to
confirm.
2. The minute digits will flash. Press the
SKIP
buttons to
adjust the minute digits, then press the
MEM –/AL.1
button to
confirm.
3. The wake up mode display will flash. Press the
SKIP
buttons repeatedly to select the wake up mode.
(FM/iPhone/
BUZZ)
. Press the
MEM –/AL.1
button to confirm.
• To wake up to ‘FM Broadcasting’, you have to pre-tune your
desired radio channel in FM radio mode before setting the
wake up function.
• To wake up to iPod/iPhone playback, you must have you iPod/
iPhone docked.
• Wake up to Buzzer.
In case you forgot to dock your iPod/iPhone, the buzzer alarm will sound once the alarm
time is reached.
1
1
1
1
2
1
iPHWAV10_IB_final110509.indd 12
09/05/2011 4:45 PM
