IWAKI PUMPS PDS-105 RA, Инструкция по эксплуатации

Страница: 7 / 24

7
Sa
fe
ty i
ns
tru
cti
ons
CAUTION
Qualified personnel only
The pump should be handled or operated by qualified personnel with a
full understanding of the pump. Any person not familiar with the product
should not take part in the operation or maintenance of the pump.
Use specified power only
Do not apply any power other than that specified on the nameplate. Other-
wise, failure or fire may result. Ensure the pump is properly grounded.
Ventilation
Fumes or vapours can be hazardous with certain solutions. Ensure proper
ventilation at the operation site.
Do not install or store the pump:
• In a flammable atmosphere.
• In a dusty/humid environment.
• In a corrosive atmosphere
.
Flushing before operation
Flush the inside of the pump and piping with pure water or the liquid to be
delivered before the start of operation.
Static electricity
When low electric conductivity liquids such as ultra-pure water and fluor
inactive liquid (e.g. Fluorinert
TM
) are handled, the static electricity may be
generated in the pump and may cause static discharge. Take counter-
measures to remove the static electricity.
Wear part replacement
Follow instructions in this manual for wear part replacement. Do not dis-
mantle the pump beyond the extent of the instructions.
Before returning product
Be sure to drain chemicals and clean the inside of the pump before return
so that a harmful chemical does not spill out in transit
.
Disposal of a used pump
Dispose of any used or damaged pump in accordance with relevant regu-
lations. Consult a licensed industrial waste products disposing company.
Prohibition
Requirement
Prohibition
CAUTION
Requirement
Requirement
Requirement
Requirement
Requirement
Requirement