49
O
pe
ra
tion
AUTO operation
Run or stop the pump with the external signal (CN5 PIN1 START/STOP signal) from user PLC.
Select "7. MANU or AUTO" in the main menu and push the ENTER key.
Select "AUTO" and push the ENTER key.
The controller returns to the main menu.
Select "3. PUMP DRIVE" and push the ENTER key.
Use the UP and DOWN keys (or the SELECT key) to choose "YES" and push the EN-
TER key if feedback control is required. Or choose "No".
• Two different displays below will show up depending on whether feedback control is chosen or not.
• After this setting is completed, the pump runs at any time when the CN5 PIN1 START/STOP signal is
entered.
* AUTO operation can be stopped by pressing and holding the START/STOP key for 2 seconds or stopped as
described in the earlier page.
When feedback control is selected:
When feedback control is not selected:
2
1
3
4
Pump operation