32
Before operation
Flow rate adjustment
A flow rate can be adjusted only by changing a stroke rate (stroke length
adjustment is not available). A stroke rate can be set by keypad operation from
1 to 360spm. The relation between a flow rate* and a stroke rate is shown as
below.
Turn on power and call up manual
mode.
Enter manual mode to indicate a
stroke rate on the screen.
•
Push the start/stop key when the
pump is in the EXT mode.
•
When "STOP" appears on the
screen, suspend the STOP signal.
Determine a stroke rate that will meet a required flow.
See the above table.
*
The discharge capacity described on
the nameplate is the value at 100%.
2
1
ON
START
STOP
100
%
75
50
25
0
180
360 spm
Fl
ow
r
ate
Stroke rate
