background image

7

Sa

fety i

ns

tru

ctio

ns

CAUTION

Qualified personnel only

The pump should be handled or operated by qualified personnel 
with a full understanding of the pump. Any person not familiar with 
the product should not take part in the operation or maintenance of 
the pump.

Keep electric parts and wiring dry

Risk of fire or electric shock. Install the pump where it can be kept 
dry.

Ventilation

Fumes or vapours can be hazardous with certain solutions. Ensure 
proper ventilation at the operation site.

Do not install/store the pump:

• In a flammable atmosphere.
•  In a dusty/humid environment.
•  Where operating (or storage) temperature can fall below 5ºC (or 

0ºC) or exceed 40ºC.

•  In direct sunlight or wind & rain.

Spill precautions

Ensure protection and containment of solution in the event of 
plumbing or pump damage (secondary containment).

Do not use the pump in a wet location

The pump is not waterproof. Use of the pump in wet or extremely 
humid locations could lead to electric shock or short circuit.

Do no use a damaged power cable

Risk of fire or electric shock. The cable is not replaceable. The 
whole pump unit needs to be replaced when the cable is damaged.

CAUTION

Requirement

Requirement

Caution

Prohibited

Prohibited

Prohibited

Electrical

shock

Содержание APN-P110-D4

































Отзывы: