manualshive.com logo in svg

IVT Optima 1000, Руководство по сборке, пусконаладке и обслуживанию

Поделиться
Скачать
IVT Optima 1000 Скачать руководство пользователя страница 33

33

FOR THE USER

Low pressure switch (LP)

Possible cause 1:  The evaporator is clogged.

Action:  

1.  Clean the evaporator. See  

Maintenance.

 

2.  Press the Ackn. button.

 

3.  Wait for the heat pump to start.

 

4.  If the fault returns, contact your dealer.

Possible cause 2:  Lack of refrigerant in the heat transfer circuit.

Action:  

1.  Press the Ackn. button.

 

2.  Wait for the heat pump to start.

 

3.  If the fault returns, contact your dealer.

Possible cause 3:   Fault in the automatic defrosting system or fan 

motor.

Action:  

1.  Press the Ackn. button.

 

2.  Wait for the heat pump to start.

 

3.  If the fault returns, contact your dealer.

Possible cause 4:  Faulty expansion valve (the alarm appears in 

time periods of 3-4 weeks).

Action:  

1.  Press the Ackn. button.

 

2.  Wait for the heat pump to start.

 

3.  If the fault returns, contact your dealer.

High pressure switch (HP) 

Possible cause 1:  Air in the heating system.

Action:  

1.  Press the Ackn. button.

 

2.  Check whether there is air in the radiators.

 

3.  Fill the heating system and vent if necessary.

Possible cause 2:  Not enough fl ow over the heat pump.

Action:  

1.  Press the Ackn. button.

 

2.  Check that the heat carrier pump has not stopped.

 

3.  Check that all the valves are open.

 

4.  Possibly increase the pump speed.

Possible cause 3:   Particle fi lter is clogged.

Action:  

1.   Press the Ackn. button.

 

2.  Check the fi lter.

 

3.  Clean the fi lter if necessary, see 

Maintenance

.

Possible cause 4:  The refrigerant circuit is overfi lled.

Action:  

11.  Press the Ackn. button.

 

2.  Wait for the heat pump to start.

 

3.  If the fault returns, contact your dealer.

Possible cause 5: The dr ying fi lter is clogged.

Action:  

1.  Press the Ackn. button.

 

2.  Wait for the heat pump to start.

 

3.  If the fault returns, contact your dealer.

LP in the menu display stands for 
low pressure switch.

Note

What to do if a fault occurs

Increase  the speed of the heat car-
rier pump:

Use a screwdriver or a coin to increase 
the speed of the heat carrier pump. Turn 
one step anti-clockwise. 

Note

The menu display shows:

The menu display shows:

ALARM           (LP)

Low pressure switch

  031020 16:08:15

         Info  Ackn.

ALARM           (HP)

High pressure switch 

 

 

  031020 16:08:15

         Info  Ackn.

Содержание Optima 1000







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды