26
FOR THE USER
Extra functions (Customer level 2)
The number of hours the heat pump has been in
operation
The menu shows the number of hours that the heat pump has been in
operation since the day of installation.
The heat pump’s hot water mode and heating mode
operations as a percentage
The menu applies to heat pumps installed for operating modes A and B.
The menu shows the heat pump’s distribution between hot water mode and
heating mode. The allocation is stated as a percentage. Heating mode refers
to heating of the radiator water.
The number of hours additional heat has been in
operation
The menu shows the number of hours additional heat has been in operation
since the day of installation.
Additional heat’s hot water mode and heating
mode operations as a percentage
The menu applies to heat pumps installed for operating modes A and B. The
menu shows the additional heat's allocation between hot water mode and
heating mode. The allocation is stated as a percentage. Heating mode refers
to the heating of the heating water.
Set the time and date
The heat pump has functions that are dependent on both the clock and date.
Thus it is important that these are correct. This is how to access the menu
Clock, setting time and date
:
1. Press the Heat button until Access = CUSTOMER2 is displayed.
2. Press the Menu button.
3. Turn the menu dial clockwise until you reach the menu
Clock, setting time and date
(menu 10).
4. Press the Select button and make your settings with the help of the
menu buttons and the menu dial.
Op. time readings
Heat pump in operat.
number of hours? 7.1
Return Select
Op. time readings
Distribution HP
DHW-Rad in % 7.2
Return Select
Op. time readings
Add. heat in operat.
number of hours? 7.3
Return Select
Op. time readings
Distribut. add. heat
DHW-Rad in %
7.4
Return Select
Main menu
Clock, setting
time and date 10
Return Select