
GB-7
ENGLISH
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button ( ) to set desired
air fl ow direction.
HORIZONTAL AIR FLOW DIRECTION
1
Press the SWING button ( ) to set desired
air fl ow direction.
CAUTION:
Never attempt to adjust the louvers manually.
• Manual adjustment of the louvers can cause the unit to
malfunction.
• When the vertical adjustment louver is positioned at the
lowest position in the
COOL or DRY mode for an extended
period of time, condensation may result.
NOTE:
• The adjustment range is narrower than the SWING
range in order to prevent condensation from dripping.
AUTO
10
50°F
1
10
50°F
1
ADJUSTING THE AIR FLOW
DIRECTION
1
During operation, press the
PLASMACLUSTER button.
• The remote control will display “
”.
• The blue PLASMACLUSTER lamp on the
unit will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn
off.
NOTE:
• Use of the PLASMACLUSTER operation will be
memorized, and it will be activated the next time you
turn on the air conditioner.
• To perform the PLASMACLUSTER operation in fan
only mode, press the PLASMACLUSTER button
while the unit is not operating. The mode symbol of
the remote control will go off and the fan speed can
not be set AUTO.
• Plasmacluster is Sharp’s original technology. For more
information, please visit:
http://www.sharp-world.com/pci/en
PLASMACLUSTER OPERATION
Plasmacluster ions released into the room are
effective against airborne contaminants, such as
mold, viruses, and allergens.
1
TIPS ABOUT AIR FLOW DIRECTION “AUTO”
COOL mode
The open panel will be set obliquely downward
for less than 20 minutes, and then shift to horizontal
or obliquely upward to deliver cool air to the ceiling.
HEAT mode
The open panel will be set obliquely backward
when outlet air temperature is low, and then shift
to obliquely downward when outlet air becomes
warm.
DRY mode
The open panel will be set obliquely upward.
Obliquely
downward
Horizontal
Obliquely
upward
or
Obliquely
backward
Obliquely
downward
Obliquely
upward
When outlet air
temperature
is low
When outlet
air becomes
warm