Ivsec NC649A, Руководство пользователя

Страница: 27 / 35

23
4.21 Alarm Input
IP Camera
Alarm Input
setting interface as shown in the follow figure:

Alarm Input: Select the alarm input port, there are 1/ 2 optional. Then click Handle can implement follow
parameters settings

Alarm In Name: Input alarm input name

Trigger:
Select the alarm status: Normally Open/ Normally Close

Arm Schedule: Alarm schedule can be set from Monday to Sunday

Email: Click Email. Once alarm triggers that it will send Email to appointed mailbox

Snap: Click Snap. Once alarm triggers that it will snapshot current image picture

Record: Click Record. Once alarm triggers that it will record video automatically

Alarm Output:
Click
Alarm Output
. There is a active warner connected to the alarm output port. Once alarm
triggers that it will linkage embedded relay switch to make alarm output

Snap Count: Set the snapshot image count for this time

Snap Interval: Set the snapshot interval time

Enable PTZ: Click Enable PTZ. When alarm input riggers alarm, it will linkage the PTZ motion

Preset: Select
the linkage preset point from 1 to 8 optional
After complete all parameters setting, click Save, the settings will take effect immediately.