Ivsec NC649A, Руководство пользователя

Страница: 14 / 35

10
4.7 Motion Detection
IP Camera
Motion Detection
setting interface as shown in the follow figure:

Enable: Select whether to enable the Motion Detection function.

Arm Schedule: Set the alarm schedule from Monday to Sunday

Mask Set: Press and drag the left mouse button in the Mask Set preview interface, then draw the small check
optional to set the detective areas

Clear: Click Clear to clear the current detective areas

Sensitivity: The higher sensitivity, the more obvious motion detective effect

Email: Click Email . Once alarm triggers that it will send Email to appointed mailbox

Snap: Click Snap . Once alarm triggers that it will linkage camera to snapshot picture and store it in the TF card

Record:
Click
Record
.Once alarm triggers that it will linkage camera to record video and restore it in the TF
card.

Alarm Output: There is a active warner connected to the alarm output port. Once alarm triggers that it will
linkage embedded relay switch to make alarm output

Enable PTZ: When motion detection triggers alarm, it will linkage the PTZ motion

Preset:
When motion detection triggers alarm, it will linkage the presets

Snap Interval: Set the snapshot interval time

Snap Count: Set the snapshot image count for this time
After complete all parameters setting, click Save, the settings will take effect immediately.