Install a T-piece in hydraulic line for the mounting of the pressure transducer.
Automatic lift motor travel de-activation methods
during the load weighing cycle
Two
BLACK wires
are connected to the internal relay, dry contacts located in the ED2-EP digital indica-
tor. This internal relay is controlled by the microprocessor and activate only during the load weighing
cycle.
There is no power connected to these two BLACK wires.
Internal relay configuration is
SPST
, normally closed contacts NC, at 1A current contacts rating.
Method A.
(Newer electric pallet trucks with CANbus controllers)
Use two
BLACK wires and “splice” them in series
with the operator activated
lift control switch
wire
or signal wire from electronic controller to pump solenoid activating pump motor.
The predetermined motion of the lifting cylinder and the load weight measurement “weighing cycle” will
be initiated and controlled automatically by the software algorithm based on the input from the pressure
transducer signal. Once the load weight is shown on the LED display internal relay will be de-activated
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
Pressure Transducer
1/4”-18 NPT male
Two Black Wires
Lift Motor Control Interface
Digital Indicator
Mounting Bracket
with Two
Shock Absorbers
