Accumulative Load Weight Function
(ED2-AT, ED2-Print and ED2-AT-SM SkidWeigh Series)
Right Button (
Red
) :
Accumulative total load weight
RESET
and
.
• Every time LED display shows load weight and left button
(Black)
is pressed, the load weight will be
added into a weighing total counter. Display also shows the current total weight of all loads entered into the
weighing counter.
• A quick “blink” on LED display indicates that current load weight has been added into the total weighing
counter.
• Every time that LED indicator shows the load weight and the right button (
Red
)
is pressed, the current load
weight or current total weight in weighing counter memory will be reset. In the case of the system
equipped with on-board printer, the weight ticket will be printed.
• The current load weight will be shown on LED display until next time forks are lowered to the ground.
Sample of load weight printouts
Check weighing accuracy is /- 0.1 to 1% of lift truck maximum lifting capacity
.
•
Overload Warning:
Every time the pre-set overload load weight is lifted the LED display will show the load
weight value. All digits will “FLASH”. Buzzer will be activated as well if the system equipped with audio
warning. To stop LED display “FLASHING” and to turn buzzer off, lower the overloaded weight to ground.
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
