manualshive.com logo in svg

IVDT SkidWeigh ED2-AT Series, Установка и калибровка

Поделиться
Скачать
IVDT SkidWeigh ED2-AT Series Скачать руководство пользователя страница 10

User’s Manual    

                                                                                                                                                           

Lift truck operator copy

Standard Weighing Procedure 

 

(All ED2-AT Series SkidWeigh & FreightWeigh systems)

•

Insert the forks  into the pallet load. Lower the forks to the ground. With  no hydraulic pressure in lifting line 
the

 Mode LED display will show number

 

8

.

System is ready to weigh product on the forks.

•

Activate the lift control lever and lift the load just above the ground.

•

As soon as  the load is lifted, digital display will go “blank” for a  moment and the load weight will be shown 
on the LED display.

Note:

 To initiate  the 

“Weighing  Cycle”

 the LED indicator must  show 

Mode  8

. If LED  display shows any 

other number, lower the forks to the ground. Always activate lift control valve  lever “quickly” and lift the load 
weight just above the ground. Do not attempt to lift the load slowly!    

Accumulative Load Weight Function

 

(ED2-AT, ED2-Print and ED2-AT-SM SkidWeigh Series)

 

        

Left Button (Black) :

 Accumulative 

       

Integrated Visual Data Technology Inc.   3439 Whilabout Terrace, Oakville, Ontario, Canada  L6L 0A7  

    

Содержание SkidWeigh ED2-AT Series












Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды