18
2. - Statistics
The menu “2. Statistics” is used for function control and
long-term monitoring of the system. The submenus
described under 7.1-7.6 are available.
The menu is closed by pressing “esc” or selecting “Exit
statistics”.
For system data statistics it is essential for the time to be set accurately on the control-
ler. Please note that the clock continues to run for about 24 hours if the mains voltage
is interrupted, and after that has to be reset. Improper operation or an incorrect time
may result in data being cleared, recorded incorrectly or overwritten. The manufacturer
accepts no liability for the recorded data!
Caution
Statistics
2.1. - Operating hours
Display of operating hours of the relays connected to the controller.
2.2. - Heat output
Display of the heat output of the system in KWh
2.3. - Graphic overview
This provides a clearly-organised display of the data listed under 2.1 - 2.2 as a bar graph. Vari-
ous time ranges are available for comparison. The two left-hand keys can be used to page
through the data.
2.4. - Error messages
Resetting and deleting the individual analyses. The function “All statistics” clears all analyses
but not the error messages.
2.5. - Reset / clear
Display of the last 15 errors occurring in the system with indication of date and time.
Caution
Resulting data is only approximate value for function control!
