16
5201335 REV A
IQ POWER BPS-C POWER SUPPLY
on the IQ Power BPS-C Power Supply main circuit board, turning power supply on
or off, depending on configuration of jumper J3.
Set Up with Control Station
Each IQ Power BPS-C power supply has an address (number) associated with it.
These numbers serve to identify the power supply in digital communications. This
address can be a number of 1 through 10 (the default is “1”).
The power supply address numbers may be manually adjusted or may be
automatically set by the Control Station. Having multiple power supplies with the
same address number connected to a Control Station is not permitted.
To manually adjust power supply address
, connect unit by itself to a Control
Station. Turn the Control Station on and allow the Control Station to begin
running. Tap the device icon for the BPS-C power supply. Tap the Neutralizer
tab. Tap the right arrow to get to page 2. Locate and tap the editing pencil icon
for Device Address. You will be prompted to enter the Control Station password
(default password is “PASSWORD”). A touch pad will appear that may be used to
manually set the power supply address. The power supply will flicker its indicator
lights to confirm setting of the power supply address. Navigate to the Control
Station home page and refresh by tapping on the small refresh icon (circle / arrow)
on the bottom right of the screen.
To automatically set power supply address
, use the Control Station. The default
Power Supply Number for a new unit is “1”. Plug first power supply (only) into
Control Station and turn Control Station on. Allow Control Station to boot-up
and begin operation. Plug second power supply into Control Station. The Control
Station will re-address second power supply to “2”. Plug third power supply into
Control Station. The Control Station will re-address third power supply to “3”.
Repeat this process until all power supplies (or IQ Power / IQ Easy devices) are
installed. Each power supply or device will be given a unique address (device
number).
A variety of information can be checked, and operating parameters set
, for the
IQ Power BPS-C power supply through the IQ Power Control Station via the device
page. Tap on the BPS-C device icon to access these pages. A summary tab will appear
offering important information. A tab for neutralizer will also appear. Tapping
on the neutralizer tab opens a page where operating parameters may be edited or
selected. Typical parameters below.
Device Name
: A user-editable name to identify specific device (14 character).
Bar Type
: A fixed description for the type of bar connected to the BPS-C power
supply.
