2
Dual Phase+ Power Supply
5100636 Rev. F
2. DESCRIPTION
Simco-Ion’s Dual Phase+ Power Supply is designed to power Simco-Ion’s
Conveyostat and High Speed Web Bar Static Neutralizers. The Dual Phase+ Power
Supply is capable of producing bipolar high voltage currents used to generate both
positive and negative ions in extremely high quantities. This allows the neutralization
of static charges on products moving at high speeds.
3. SPECIFICATIONS
Input Voltage
120 VAC, 60 Hz, 0.5A
230 VAC, 60 Hz, 0.25A
Output Voltages
120 (4 kV), 4016574 NEMA 12 Enclosure (indoor Conveyostat)
120 (4 kV), 4016576 NEMA 4 Enclosure (outdoor Conveyostat)
230 (4 kV), 4016575 NEMA 12 Enclosure (indoor Conveyostat)
230 (4 kV), 4016577 NEMA 4 Enclosure (outdoor Conveyostat)
Short Circuit Current
5.0 mA (max)
Enclosure
Painted steel with hinged and gasketed cover
Weight
22 lb (approx)
Color
Grey cabinet; white panel
4. INSTALLATION
Before placing the static neutralizer and the Dual Phase+ Power Supply in operation,
be sure that all grounds and connections have been made as described in the
following steps. Turn the power OFF when the equipment is not in use.
a. The power unit supplied is selected by the factory depending on the type of
static neutralizer to be powered. Therefore the power unit must be used only
with the unit for which it was originally supplied. Do not remove equipment
from, or add equipment to, the power unit without first consulting Simco-Ion.
b. A typical power unit consists of two transformers (Phase A and Phase B) housed
in an industrial NEMA Type 12/13 enclosure (see Figure-1). Connections to
the transformer primary windings are alternated so that a pair of transformers
will produce both polarities simultaneously at the outputs. This means that
both positive and negative ions are produced at the same time by adjacent static
bars within the static neutralizer.
c. Power requirements for Dual Phase+ Power Supplies: 120 VAC, 60 Hz, approx
1 Amp.
