ORBITALUM TOOLS GmbH
D-78224 Singen www.orbitalum.com
[REV. 20200320] OC_GFX_BA_790144761_00__INH-02_EN
54
Initial operation
GFX 3.0, GFX 6.6
eNGLISH
6. INITIAL OPeRATION
6.1
checking the parts of delivery
• Check delivery for completeness and damage caused by transport.
• Report any missing parts or damage caused by transport to your supplier immediately.
6.2
Included with the machine
Subject to modifications.
PcS. ARTIcLe
GFX 3.0
GFX 6.6
1
Pipe cutting and beveling machine
x
x
1
Wooden transportation crate
x
x
1
Saw blade, Code 790 ...
... 041 035
... 042 064
1
Quick-mounting plate without screw clamps*
–
x
1
Set of stainless steel caps**
x
x
1
Line laser with holder and fastening screws***
x
x
1
Tool key set
x
x
1
Tube of saw blade lubricant GF TOP (Code 790 060 228)
x
x
1
Set of operating instructions and spare parts list
x
x
*
The GFX 3.0 can be mounted directly on the workbench without a quick-mounting plate. Quick-mounting plates with screw clamps for GFX 3.0 and GFX 6.6 are available
optionally.
** Already mounted on the sliding clamping jaws of the GFX at delivery.
*** The line laser has to be mounted on the GFX before commissioning (mounting, see chap. 8.2, p. 58).
7. STORAGe AND TRANSPORT
ATTeNTION!
Incorrect machine storage!
Diverse physical injuries and material damage.
X
Store the machine in its original crate in a dry environment.
DANGeR!
Fatal electric shock!
X
Before transportation or changing the workplace, switch off the machine, wait until the
machine/tool stops running and pull the mains plug.
WARNING!
During transportation, the ON/OFF switch may unintentionally be activated
causing the machine to start up!
Diverse physical injuries and material damage.
X
Before transportation or changing the workplace, switch off the machine, wait until the
machine/tool stops running and pull the mains plug.
WARNING!
Heavy weight when transporting the machine!
Danger of being injured through.
X
Transport the machine over long stretches with corresponding lifting aids.
