- 15 -
INSTRUCTIONS FOR USE
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
5.
General Warnings
Operators have a duty to familiarise themselves adequately, using this manual before performing
any intervention, adopting the specific safety requirements to make every kind of human-compu
-
ter interaction safe.
Any technical modification that affects the operation or safety of the machine must only be carried out
by the technical personnel of the manufacturer or by technicians that are formally authorised by the
manufacturer. Failure to do so exempts the manufacturer from any liability for for any possible resul
-
ting modifications or damage.
Even after appropriate familiarisation, upon the first use of the appliance, in any case simulate a
number of test operations to save more rapidly the main functions of the appliance, e.g. start-up,
shut-down, etc.
The appliance is provided already tested by the manufacturer and fitted with the type of gas and elec
-
trical supply specified on the rating plate applies.
In stoppage conditions caused by faults and emergencies, in the event of imminent danger, it is
mandatory to close all the locking devices on the supply lines upstream the appliance (Electrical-
Water-Gas).
The drawing illustrates the various positions the knobs take on during an emergency stop (A1-B1-
C1-D1-E1) and stoppage during a working phase (A2-B2-C2-D2-E2).
Stoppage due to faulty operations
Safety component
Standard supply with following models:
• Fryer (present on all models)
• Pasta cooker (only with Electric model)
• Stove (present on all models with electric oven)
• Frytop (present on all electric models)
• Induction cook tops (present on all models)
• Glass-ceramic hob (present on all models with electric oven)
Stop:
In situations or circumstances which can be dangerous, a safety thermostat is triggered, automatically
stopping heat generation. The production cycle is interrupted until the cause of the fault is resolved.
Restarting:
After the problem that triggered the safety thermostat is resolved, the authorised technician can
restart the appliance by means of the specific controls.
Emergency stop
In situations or circumstances which can be dangerous, turn the knob to “Zero” depending on the model (A-B-
C-D-E-1). See knobs, keys and indicator light modes and functions.
Stoppage during a work phase
In situations or circumstances which require temporary stop of heat generation, act as follows:
•
Gas Appliance: Turn the knobs to the piezoelectric position (A-B-C-2), the pilot flame remains lit as the gas
flow in the burner is not interrupted.
•
Electric Appliance: Turn the knobs “D2-E2” to “Zero” to stop heat generation.
(See knobs, keys and indicator light modes and functions).
C1
A1
30
0
27
0
250
230
210
19
0
.
17
0
B1
E1
D1
1
0
C2
1
2
3
45
6
7
8
A2
D2
300
27
0
25
0
230
210
19
0
.
1
07
E2
1
0
B2
300
27
0
25
0
230
210
190
.
17
0
Description of stop modes
