ITW Gema PG 1-R1, Инструкция по эксплуатации и список запасных частей

Страница: 11 / 20

7 PG 1-R1
Issued 05/01
Maintenance schedule
Conscientious maintenance at regular intervals increases the service life of the PG 1-R1
powder gun and will result in uniform coating quality over a longer period!
a) Daily maintenance
1a Clean gun, see below
b) Weekly maintenance
1b Clean powder hopper, injector, and gun. Do not refill the powder hopper until coating is
to be resumed!
2b Check ground connections between control module, coating booth, suspension device
of workpieces or the conveyor chain.
Cleaning and repairs
PG 1-R1 Powder Gun
a) Cleaning
Frequent cleaning of the gun is recommended to assure good coating quality.
Before cleaning the gun, switch off the control module and detach
the gun connector.
The compressed air used for cleaning should be free of oil and
water.
Daily:
1. Clean the outside of the gun.
Weekly:
2. Detach the powder hose at the connector.
3. Detach the nozzle from the gun and clean it.
4. Blow out the gun through the powder inlet in the direction of flow.
5. Clean the gun tube ( 19 ) with the spiral brush supplied.
6. Blow out the gun with compressed air again.
7. Reassemble and reconnect the gun.
8. Blow the Powder hose through and clean.
IMPORTANT