NDP20 ICE MAKER MAINTENANCE
3.
Pull upwards the connecting pipe. It has been assembled by pressing into place.
4.
Disassemble the nozzles and the connecting tube covers and clean them.
5.
Disassemble and clean the main filter of the production unit. (It is assembled by
pressing into it)
6.
Assemble the filter, nozzles and connecting tube.
ATTENTION:
IT IS ESSENTIAL THAT SPRAY NOZZLES ARE COMPLETELY
PERPENDICULAR TO THE CONNECTING TUBES, OTHERWISE THE CUBES
AT THE ENDS MAY NOT RECEIVE WATER.
7.
Place the grill over the nozzles, with the back slots secure.
8.
Install the curtain, ensuring that all of the strips can move freely.
9.
Run the machine but DISCARD THE FIRST SET OF ICE CUBES.
5. MAINTENANCE TABLE:
MAINTENANCE
Dusty ambient
Normal ambient
Air condenser cleaning
6 months
12 months
Water condenser cleaning
6 months
12 months
MAINTENANCE
Hard water (over 400ppm)
Soft water (less than 400
ppm)
Water filter changing
6 months
12 months
Hydraulic circuit cleaning
6 months
12 months
Injectors cleaning
6 months
12 months
Sanitation cleaning
6 months
6 months
Exterior cleaning
To do by user
To do by user
Stock bin cleaning
To do by user
To do by user
During the maintenance visit, check the connections on the electric board.
